Play from radio, More play features for disc or usb – Philips HTS3540/51 User Manual

Page 12

Advertising
background image

10

Repeat play a specifi c section

Select sections of audio or video for repeat playback.

1

During playback, press INFO .

2

Select

[Repeat AB] in the menu.

3

Press

OK to mark the start point.

4

Press

OK again to mark the end point.

Repeat play starts.

»

To cancel repeat A-B, press

•

INFO ,

select [Repeat AB] > [Off] , then press
OK .

Note

Repeat play is only possible within a track/

•

chapter.

Play from radio

The home theater can store up to 40 radio stations.

1

Check that the FM antenna is connected.

2

Press

RADIO .

“

» AUTO INSTALL...PRESS PLAY ’ appears

on the display panel if you have not
installed any radio stations. Press

.

3

Press the following buttons to control play:

Button

Action

/

Selects a preset radio station.

/

Searches for a radio station.

Fine tunes a radio frequency.

Press and hold to erase the
preset radio station.
Press to stop the installation of
radio stations.

PROGRAM Manual: Press once to access

program mode, and press again
to store the radio station.
Automatic: Press and hold for À ve
seconds to reinstall radio stations.

Note

AM and digital radio are not supported.

•

If no stereo signal is detected, or if fewer than

•

À ve stations are found, you are prompted to
install the radio stations again.
For the best reception, place the antenna away

•

from the TV or other sources of radiation.

More play features for disc or
USB

Several advanced features are available for video
or picture playback from a disc or USB storage
device.

Play a musical slideshow

Play music and pictures simultaneously to create
a musical slideshow. The À les must be stored on
the same disc or USB storage device.

1

Select a music track, then press OK .

2

Press

BACK and go to the picture

folder.

3

Select a picture, then press OK to start

slideshow.

4

Press

to stop slideshow.

5

Press

again to stop music.

Synchronize audio with video

If the audio and video are not synchronized, you
can delay the audio to match the video.

1

Press and hold AUDIO SYNC until the

audio sync message appears on the display
panel.

2

Press

+/- within À ve seconds to sync the

audio with your video.

Quick skip play to a specifi c time

Quick skip to a speciÀ c part of a video by
entering the time of a scene.

1

During video play, press INFO .

2

Press the Navigation buttons and OK to

select:

•

[TT Time] : Title time.

•

[Ch Time] : Chapter time.

•

[Disc Time] : Disc time.

•

[Track Time] : Track time.

3

Enter the time of the scene, then press OK .

EN

Advertising