Philips HTS3540/51 - Manual (Page 13)

11
6
Select an audio track, then press OK .
• [Select All] : Selects all tracks.
[ • Deselect all ] : De-selects all tracks.
7
Select [Start] in the menu to convert, then
press OK .
A new folder is created in the USB
»
storage device to store all the new MP3
audio À les.
To exit the menu, select • [Exit] and
press OK .
Note
During the conversion process, do not press •
any buttons.
DTS CDs and copy-protected CDs cannot be
•
converted.
Write-protected or password-protected USB
•
storage device cannot be used to store MP3
À les.
Change tuning grid
In some countries, you can switch the FM tuning
grid between 50 kHz and 100 kHz. Changing
tuning grid erases all preset radio stations.
1
Press RADIO .
2
Press .
3
Press and hold until ‘GRID 9’ (50 kHz)
or ‘GRID 10’ (100 kHz) is displayed.
Play audio from TV or other
devices
Press AUDIO SOURCE repeatedly to select the
audio output of the connected device .
Create MP3 audio fi les
Use the home theater to convert audio CDs into
MP3 audio À les.
1
Insert an audio CD (CDDA/HDCD) into
the home theater.
2
Connect a USB storage device to the home
theater.
3
When audio is played, press CREATE MP3 .
4
Select the conversion settings in the
[OPTIONS] panel, then press OK .
• [Speed] : Selects the write-to-À le
speed.
• [Bitrate] : Selects the conversion
quality.
5
Press to access the [TRACK] panel.
CREATE MP3
OPTIONS TRACK
Bitrate 128kbps
SUMMARY
Select Track 0
Start Exit Select All Deselect All
Time 00:00
Track01 04:14
Track02 04:17
Track03 03:58
Track04 04:51
Track05 03:53
Track06 04:09
Track07 04:38
Speed Normal
English
EN