Philips CQ-DFX972N - Manual (Page 29)

29
CQ-DFX972N
26
E
N
G
L
I
S
H
Note: Press [MENU] / [SEL] or [DISP] to return
to the regular mode.
Press [BAND] to switch between mute or attenuation in turn.
: No sound
: Decrease to 1/10 ATT
MUTE
Press [BAND] to change the volume level of the sound source as shown.
Press [BAND] to activate the function or
inactivate it in turn.
Note: The setting state of the External Mute is displayed
when the voice guidance or car telephone is used (except
when the setting state is OFF).
: No sound
: Decrease 15 levels
: Decrease 5 levels
: Unchanged OFF
LV2
LV1
LV0
When the power of this unit is turned OFF...
When the key in the ignition is turned OFF... ( )
¡Security message will be displayed.
¡The panel removal alarm will be active. (
a Page 33)
When the front panel is removed...
¡The security indicator blinks.
( a Page 33)
Security Function
Press [BAND] to switch the ACC on or off
in turn.
e
ACC ON
¡The demonstration message is shown when [SRC] / [SOURCE]
is pressed for 4 seconds or more to turn on the power.
¡The ending is shown when power is switched off.
¡Power is turned on when a disc or magazine is inserted while
power is off.
¡The Clock Time can be displayed while power is off.
¡When the ignition key is turned to OFF, the security message is
shown and the panel removal alarm sounds (at Security Function
ON setting).
ACC OFF
¡When power is turned off, the security message is shown and the
panel removal alarm sounds (at Security Function ON setting).
: Security function
is activate.
: Security function
is not activate.
OFF
ON
(Security message)
[SEL] (Menu/Return)
[BAND]
(Set)
[}] [{]
(Select)
[DISP] (Return)
[]] [[]
(Select)
ACC ON
: Set to ON if your car
has ACC position.
: Set to OFF if your car
has no ACC position.
OFF
ON