Panasonic 6363 - Manual

Panasonic Electric Works Fire & Security Technology Europe AB
Citadellsvägen 23, SE-211 18 Malmö, Sweden
Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99
[email protected] • www.panasonic-fire-security.com
Fire alarm system
Plate for wire installation 6363
• A kit for wire installation with all the necessary pieces for all kinds of detectors.
General
6363 is a kit that consists of the following:
• A metal plate with pre-drilled screw
holes for all kinds of detectors / bases.
• A clamp (to fix the plate to a wire)
• Two screws 3.5x10 mm
• Two screws 3.5x12 mm
• Two screws 4x15 mm
• Two screws 4x27 mm
• Two screws 4x40 mm
• Two spacers 6.4 mm Ø 9.5 / 4.5
• Two spacers 25.4 mm Ø 6.4 / 4.5
Product applications
The kit is used with any of the Panasonic
heat or smoke detectors plugged in a base,
allowing the user to make a wire installation
of the detector.