Panasonic MA Motion Sensor Series - Manual

MA Motion Sensor (AMA1, AMB1, 2, 3)
MOTION SENSOR
(AREA REFLECTIVE TYPE)
MA MOTION
SENSOR Series
FEATURES
1. Now even more miniature.
The new thin type cuts 35% from the
thickness of the previous short type.
Device installing is now easier than ever.
Existing short type
W10
× H20 × D19.5 mm
W.394
× H.787 × D.768 inch
⇓
Thin short type
W10
× H20 × D12.7 mm
W.394 × H.787 × D.500 inch
*“W” and “H” are detection value measurements.
2. Certain detection unaffected by the
reflectance of the object
The sensor can provide stable
detection that is not affected by the
condition (color or material of the
clothing) or parts (skin, hair, etc.) of the
object being monitored. (Reflectance
18% to 90%). Excellent performance
even when the detection surface is dirty.
3. Only connecting DC power supply
for operating
Built-in oscillation circuit type obviates
the hitherto existing need for start signal
input.
4. Use in adjacent positions is
possible
These sensors can be located in
adjacent positions, because the timing of
the external trigger signals can be
adjusted so that the beam frequency of
each adjacent sensor will not interfere
with the other.
5. Battery drive possible
By applying longer interval for the trigger
signal, you can reduce the total power
consumption.
6. Can be used with a number of
different supply voltages.
1) The 5V DC type (4.5 to 6.5V DC)
2) The free-ranging power type (6.5 to
27V DC)
They support the DC power supplies of
electronic products and equipment in
general.
*The thin short type is only available for 5V DC.
7. The open collector output system
makes for easy load drive.
These sensors provide a continuous
output during detection because the
output system makes it easy to drive the
load.
They achieve an output performance of
30V, Built-in oscillation circuit type:
100 mA, External triggering type: 10 mA
(Thin short type: 100 mA). Also, the thin
short type is available in a PNP open
collector type in addition to a NPN open
collector type.
APPLICATIONS
1. Water-based product market
• Automatic lighting of wash basin units
• Toilets
• Automatic water flow from faucets
2. Stores and financial instructions
• Automatic doors
• Automatic lighting
• Cash dispensing machines
• Automatic teller machines
• Visitor detecting sensors
3. Amusement market
• Automatic lighting for game display
4. Medical field
• Non-contact switch
5. Others
• Automatic ticket gates
• Seat-taking sensors
• Detection of passengers getting on and
off a bus
What is area reflective type?
The sensor emits a ray of light toward the
human body and detects the distance and
determine whether there is a person within
a given distance of the sensor. If the
sensor detects a person, it sets an output
non-contact switch to ON.
Thin short type
(Mounting direction: V type)
Short type
(Mounting direction: H type)
Middle type
(Mounting direction: H type)
Long type
(Mounting direction: H type)
Long type
(Mounting direction: V type)
Output
Non-contact
switch Light beam
Reflected beam
Compliance with RoHS Directive
New
All Rights Reserved © C OPYRIGHT Panasonic Electric Works Co., Ltd.