Printronix L5535 - Manual (Page 38)

Chapter 2 Powering On The Printer
38
Powering On The Printer
Printer Functions
Legend:
1) Power Switch
CAUTION The printer must be connected to the proper power source:
200, 220, or 240 VAC and 50-60 Hz, as shown on the rear panel
label. The DC power supply must be set for the proper line
voltage. Using an incorrect power source or improperly setting
the DC power supply will damage the printer.
1. Make sure the printer is plugged into the appropriate power
source, the interface cable is connected, and the host computer
is on.
2. Turn on the printer by setting the power switch to | (on).
1