Printronix L5535 - Manual (Page 42)

Chapter 2 Setting The Stacker Page Length
42
NOTE: Normal Mode supports up to 28 lb. bond (105 g/m
2
). Heavy
Mode must be used for media weights greater than 34 lb.
bond (128 g/m
2
). Some media that are 28 lb. bond (105 g/
m
2
) and higher require Heavy Mode for reliable stacking.
Setting The Stacker Page Length
Set the stacker page length to match the actual page length. On the
side of the stacker, locate the adjustment knob and the window
containing a measuring gauge (a pointer with a scale). Rotate the
knob until the pointer matches the page length being used. See the
illustration on page 40.
NOTE: If the printer page length does not match the stacker page
length, the timing of the stacker swinger arm will be
incorrect, resulting in a folding error.
Set the printer page length by following the instructions for
changing printer configurations. Refer to the
User’s Manual
for details.
11.0 5.3
11.5 5.0
12.0 4.8