Printronix L5535 - Manual (Page 72)

Chapter 3 Consumables Replacement
72
Adding New Developer
11. Shake the new developer bottle several times, remove the
bottle cap, and screw the nozzle tightly onto the bottle.
12. While rotating the developing roller knob counterclockwise,
evenly pour the entire bottle of developer powder into the
developing unit.
Legend:
1) Bottle of new Developer
2) Developing Roller Knob
13. Replace the cover and tighten the screws.
IMPORTANT If toner or developer spills on clothing, use cold water to
remove it.
1
2