Philips MCD107/98 - Manual (Page 22)

23
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated, the
»
display shows .
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] is
displayed.
When sleep timer is deactivated,
»
disappears on the display.
Listen to an external device
You can listen to an external device through
this unit.
1
Press MP3 Link to select the MP3 link
source.
2
Connect the supplied MP3 link cable to:
‡
MP3 Link jack (3.5 mm) on the unit
the headphone jack on an external
‡
device.
3
Start to play the device (see the device
user manual).
9 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, USB or TUNER is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly.
2
In standby mode, press and hold TIMER.
3
Press DISC, TUNER or USB to select a
source.
4
Press TIMER WRFRQÀUP
The hour digits are displayed and begin
»
to blink.
5
Press / to set the hour.
6
Press TIMER WRFRQÀUP
The minute digits are displayed and
»
begin to blink.
7
Press / to set the minute.
8
Press TIMER WRFRQÀUP
The timer is set and activated.
»
Activate and deactivate alarm timer
1
Press TIMER repeatedly to activate or
deactivate timer.
If timer is activated, the display shows
»
.
If timer is deactivated,
»
disappears on
the display.
Note
Alarm timer is not available in MP3 LINK ‡
mode.
If DISC/USB source is selected and the
‡
track cannot be played, tuner is activated
automatically.
English
EN