Philips MCD107/98 - Manual (Page 25)

26
Timer does not work
Set the clock correctly. ‡
Switch on the timer. ‡
Clock/timer setting erased
Power has been interrupted or the power ‡
cord has been disconnected.
Reset the clock/timer.
‡
As a power-saving feature, the system ‡
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
Remote control does not work
Before you press any function button, ‡
ÀUVWVHOHFWWKHFRUUHFWVRXUFHZLWKWKH
remote control instead of the main unit.
Reduce the distance between the remote
‡
control and the unit.
Insert the battery with its polarities (+/–
‡
signs) aligned as indicated.
Replace the battery.
‡
Aim the remote control directly at the ‡
sensor on the front of the unit.
No disc detected
Insert a disc. ‡
Check if the disc is inserted upside down. ‡
Wait until the moisture condensation at ‡
the lens has cleared.
Replace or clean the disc.
‡
8VHDÀQDOL]HG&'RUFRUUHFWIRUPDWGLVF ‡
No picture
Check the video connection. ‡
Turn on the TV to the correct Video-In ‡
channel.
Audio or subtitle languages cannot be set
The disc is not recorded with sound or ‡
subtitles in multiple languages.
The audio or subtitle language setting is
‡
prohibited on the disc.
&DQQRWGLVSOD\VRPHÀOHVLQ86%GHYLFH
7KHQXPEHURIIROGHUVRUÀOHVLQWKH86% ‡
device has exceeded a certain limit. This
phenomenon is not a malfunction.
7KHIRUPDWVRIWKHVHÀOHVDUHQRW
‡
supported.
USB device not supported
The USB device is incompatible with the ‡
unit. Try another one.
Poor radio reception
Increase the distance between the unit ‡
and your TV or VCR.
Fully extend the FM antenna.
‡
EN