Philips SJM3151 - Manual (Page 16)

16
5 Use more of your universal
remote and docking cradle
for iPod™
To access the advanced features of your
universal remote and dock for iPod™, you must
use the Set-up menu.
To open the Set-up menu, press and hold the
MODE and IPOD™ LAUNCH keys simultaneously
for 3 seconds.
To exit the Set-up menu and go directly to your
iPod™ menu, press the
IPOD™ LAUNCH key
again.
To switch to your last selected device, press the
MODE key.
5.1 Adding a device
To be able to operate your devices with your
universal remote for iPod™, you first have to
add these devices to the remote control. You can
add up to 6 devices from the list of devices
below. Examples of available devices include ( but
are not limited to):
• DVD
• Cable
• DSS ( Satellite)
• Tuner
• CD
• TV
Please check the Remote menu for the complete
listing of device labels that can be added.
You cannot add a device twice. Once you have
added a device to your Universal remote for
iPod™, it disappears from the list. However, the
list of devices includes ‘TV-2’ or ‘VCR-2’ for use
when you want to program a second TV or
second VCR.
To add a device:
1. Select the option “Add a Device” in the
Set-up menu by using the cursor keys
Press
OK .
D Note
If you have already added 6 devices on the
remote, besides your iPod™ docking cradle, you
will be asked to delete a device.
2. Select the device and brand you want to
add. Press OK . The remote will search for
available codes for the brand.
3. Follow the on-screen instructions to test
the codes. When a working code set is
found, your device is correctly installed
When the device is correctly installed, the
following screen appears:
If no working code set is found:
• You can perform a full data base search to
find a correct code set. This means that
the remote will send out all codes available
in the database until a working code is
found. This can take up to 25 minutes.
• You can learn codes from the original
remote device.
When you want to add another device, select
“Yes”. Press
OK and repeat steps 2 and 3.
When you have added all your devices, select
“No”. Press
OK to return to the Set-up menu.
Use more of your Universal
SJM315Final.indb 16 8/14/07 4:10:30 PM