Philips SJM3151 User Manual

Page 19

Advertising
background image

19

ENGLISH

• Select the delay you want to add.

Press

OK

. See instructions at the end of

this procedure, “To select the delay you
want”.

Keep in mind that an activity contains a
maximum of 25 steps.

When you have added all key presses and delays,
select “No”. Press

OK

. The activity is installed on

your universal remote for iPod™.

4. To return to the Set-up menu, select “Exit”.

Press

OK

.

To select the delay you want:
1. Use the cursor keys to scroll through the

list of possible delays.

2. Press

OK

on desired delay. You’ll see

confirmation screen.

3. Press

YES

to add another key or delay.

Press

NO

to exit activity set-up.

E

Tip

Start up the activity by pressing the Mode key
repeatedly until the activity name appears in
the header of the universal remote for iPod™
display screen. Press

OK

.

5.6 Deleting an activity

To delete an activity from your remote control:
1. Select the option “Delete an Activity” in

the Set-up menu by using the cursor keys
Press

OK

.

2. Select the activity you want to delete.

Press

OK

.

3. Confirm you want to delete the activity

by selecting “Yes”. Press

OK

. The activity is

deleted and becomes available again in the
list of activities you can add.

4. To return to the Set-up menu, select “Exit”

and press

OK

.

5.7 About RF Settings

Show details:
You can check the status of the connection
between the docking cradle and remote:

1. Select the option “RF Settings” in the Set-

up menu by using the cursor keys. Press

OK.

2. Select “Show details.” Press

OK

The name

of the connected docking cradle and the
strength of the signal appear.

3. To return to the Set-up menu, select

“Next”. Press

OK.

D

Note

When the details of the RF Settings show “No
Connection”, the remote is unable to connect to
the docking cradle. If this occurs, you must
reconnect to the dock.

Reconnect to dock
When you want to use your universal remote
for iPod™ with another docking cradle, or in
case of technical problems, you will have to pair
the remote to the docking cradle again.

1. Press and release reconnect button at the

bottom of the iPod™ docking cradle

Use more of your Universal

SJM315Final.indb 19

8/14/07 4:10:32 PM

Advertising
This manual is related to the following products: