Pentair D.E. Cartridge Style Filter - Manual (Page 5)

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Rev. F 6/15/06 5 P/N 99101200
10. Install the High Flow air relief valve to the top of the tank lid. See Diagrams 2 and 3,
Detail A. This is an O-ring seal that requires hand tightening only.
11. Install the pressure gauge in the ¼”NPT threaded hole in the tank lid, using Teflon tape on
the threads. See Diagrams 2 and 3, Detail B.
12. Never install a pump in this system that exceeds the maximum pressure of the filter. See
data label.
13. If using the optional Chlorinator Base, knockout the two slots on the system base with a
hammer and screwdriver.
14. Slide the two tabs on the Chlorinator Base into the slots on the system base.
Detail B Detail A
Detail A Detail B
Connector
Hose Assy
170046
Connector
Hose Assy
175015
Diagram 2 Diagram 3
(Installation of Dynamo Pump shown) (Installation of OptiFlo Pump Shown)
Rev. F 6/15/06 5 P/N 99101200