Other functions, Radio operations, En 38 – Philips HTS3251B/F7 User Manual

Page 38: Presetting radio stations, Listening to a preset radio station, Deleting a preset radio station, Guide to the fm radio screen

Advertising
background image

EN

38

RADIO OPERATIONS

By connecting the supplied FM wire antenna, you can listen to FM radio on this unit.

When you access radio mode for the first time, follow the
instruction to store a radio station to your preset station
list. You can store up to 40 FM radio stations in the
memory.
1) Connect the supplied FM wire antenna to the FM

ANT 75

jack on this unit.

• Refer to “Connecting FM Radio Antenna” on page 21.

2) Press [

(home)].

3) Use [K / L] to select “FM”, then press [OK].
4) Press [
s / B].

• This unit will start tuning automatically until a radio

station with sufficient signal strength is found.

• If necessary, repeat press [s / B] again until you find

the desired radio station.

• To fine-tune the reception of a weak station, press

[K / L] repeatedly until an optimal reception is found.

5) Press [OK].

• The radio station is added to the preset station list.

1) Follow steps 1) to 3) in “Presetting Radio Stations”

on page 38.

2) Use [RED] / [GREEN] to select the desired preset

station.
• This unit will tune to the selected preset radio station.
• To go to the previous / next page of the preset station

list, press [BLUE] / [YELLOW].

1) Directory
2) Total number of preset stations
3) Audio mode (Stereo or Mono
mode)
4) Frequency of current radio station
5) Button guide for tuning
6) Color key (RED / GREEN / BLUE / YELLOW) guide
7) Preset station list
8) Current status

1) Follow steps 1) to 3) in “Presetting Radio Stations”

on page 38.

2) Use [RED] / [GREEN] / [BLUE] / [YELLOW] to select the

desired preset station.

3) Press [CLEAR].

• The selected station is deleted from the preset station

list.

Presetting Radio Stations

Note

• While auto tuning, audio will be muted until this unit

finds a radio station with sufficient signal strength.

Listening to a Preset Radio Station

Note

• You can also select the preset station by :

-Entering the desired preset station number using

[the Number buttons]

-Pressing [SEARCH] and then enter the desired preset

station number using [the Number buttons].

• You can change the audio mode(stereo or mono

mode) by pressing [AUDIO] repeatedly.

Guide to the FM Radio Screen

Deleting a Preset Radio Station

Nevada

23

100.00MHz

101.50MHz

102.50MHz

103.50MHz

104.50MHz

107.50MHz

Received

87.50MHz

105.00MHz

Tuning -

Tuning +

FM

Stereo

08

09

10

11

12

13

14

Page Up

Page Down

Next

BD Home Theater System

1

4

5

6

7

8

2 3

Prev

Advertising
This manual is related to the following products: