PSC FALCON 315 - Manual (Page 42)

Terminal Setup
A screen will appear with a display resembling the terminal screen.
Clicking on the Font button on the upper left brings up a screen in which you can modify
the font settings, as shown below.
Select
Terminal Messenger from the Tools menu.
You may enter an Address Range in the
From and To boxes on this screen. Click on Add
when finished.
Enter a message to send in the space provided, select the terminal to receive this message
by clicking on it in the
Select Terminal(s) column, and click on the Send button to send
the message of your choice to the terminal of your choice.
See the example of the Terminal Messenger screen below.
Supported Equipment Manual
• May, 2006 2-34