PSC FALCON 315 User Manual
Page 50
Terminal Setup
a. Emulation protocols (IBM 5250, IBM 3270, DEC VT200, etc.)
b. PowerNet Twin Client products
c. RF network concepts
d. Wired network concepts
e. Telnet sessions
f. TCP/IP
They are text files that can be read with any editor or viewer and can be useful to end
users and integrators, even if they may not have all the requirements above.
• I have an intermittent problem and it could happen on any one of my 100
terminals. RF Monitor only does one terminal at a time. What can I do?
RF Monitor is not the right diagnostic tool for this type of problem. PowerNet
products have another diagnostic tool that can be used called the "Diagnostic Server".
This tool can be set up to run trace diagnostics on up to 300 terminals at the same
time. This tool will be provided as needed for systems under PowerNet support
agreement OR by T&M when they are not covered.
It also includes the service of a PowerNet support engineer.
Server Transfer is another feature. From the
Tools
menu, select
Server Transfer
.
The FTP Settings screen appears.
x
To send object editor and configuration files from Windows to your Linux box, enter
your server address, and click on
OK
.
Supported Equipment Manual
• May, 2006
2-42