Philips CD685 - Manual (Page 33)

33 EN
Set the dial mode
1
Select [Menu] > > [Dial mode], then
press [OK] to confirm.
2
Select a dial mode, then press [OK] to
confirm.
» The setting is saved.
Note
• If your phone is in pulse dial mode, press *
during a call for temporary tone mode. Digits
entered for this call are then sent out as tone
signals.
First ring
If you have subscribed to the caller ID service
with your service provider, your phone can
suppress the first ring before the caller ID
displays on the screen. After the phone is
reset, it can detect automatically if the caller ID
service is subscribed and start to suppress the
first ring. You can change this setting to suit your
preference. This feature only applies to models
with first ring support.
Turn the first ring on/off
1
Select [Menu] > > [First ring], then
press [OK] to confirm.
2
Select [On]/[Off], press [OK] to confirm.
» The setting is saved.
Note
• To reset the first ring status, go to the reset
menu.
Auto clock
Note
• This service is network dependent.
Note
• Ensure you have the caller ID service before you
have this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, ensure the current year is set.
1
Select [Menu] > > [Auto clock], then
press [OK] to confirm.
2
Select [On]/[Off] . Press [OK].
» The setting is saved. .
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 5
handsets.
Auto registration
1
Place the unregistered handset on the
base station.
» The handset detects the base station
and start to register automatically.
» Registration is completed in less
than 2 minutes. The base station
automatically assigns a handset
number to the handset.
English