20 frequently asked questions – Philips CD685 User Manual

Page 46

Advertising
background image

46 EN

20 Frequently

asked questions

No signal bar displays on the screen.

• The handset is out of range. Move it

closer to the base station.

• If the handset displays [Unregister], put

the handset on the base until the signal

bar appears..

Tip

For more information, see “Register the

handsets” on the Services section.

If I fail to register the additional handsets to

the base station, what do I do?

Your base memory is full. Unregister the unused

handsets and try again.

No dialing tone

• Check your phone connections.

• The handset is out of range. Move it

closer to the base station.

I cannot change the settings of my voice mail,

what do I do?

The voice mail service is managed by your

service provider but not the phone itself.

Contact your service provider to change the

settings.

The handset on the charger does not charge.

• Ensure the batteries are inserted

correctly.

• Ensure the handset is placed properly on

the charger. The battery icon animates

when charging.

• Ensure the docking tone setting is turned

on. When the handset is placed correctly

on the charger, you can hear a docking

tone.

• The charging contacts are dirty.

Disconnect the power supply first and

clean the contacts with a damp cloth.

• Batteries are defective. Purchase new

ones from your dealer.

No display

• Ensure the batteries are charged.

• Ensure there are power and phone

connections.

Bad audio (crackles, echo, etc.)

• The handset is nearly out of range. Move

it closer to the base station.

• The phone receives interference from

the nearby electrical appliances. Move the

base station away from them.

• The phone is at a location with thick

walls. Move the base away from them.

The handset does not ring.

Ensure the handset ringtone is turned on.

The caller ID does not display.

• The service is not activated. Check with

your service provider.

• The caller’s information is withheld or

unavailable.

Note

If the above solutions do not help, disconnect

the power supply from both the handset and

base station. Try again after 1 minute.

Advertising
This manual is related to the following products: