Panasonic VB-43320 - Manual (Page 16)

Panasonic@
June
Release Notes
CPC-EX, Version 1 .O (Preliminary)
Notes
call (FF3 and after dialing a busy extension (FF3
l
Use existing addresses thru to assign select key
features to Flexible Function Screens.
l
Use existing addresses to assign screen text.
l
Select key features for Fixed Function Screens will not appear on
small-display phones.
3. While the select key feature is displayed, you can execute the feature
by pressing the or select key.
Variable Mode with an FF-Key. You can program the l 6 1 code
into an FF-key: In progr mode, press FF5
The FF-key will toggle Variable Mode on/off while the extension is idle or in an
off-hook/dial-tone state. The FF-key LED will remain lit (red) while Variable
Mode is “On”. (You can also use a one-touch key to toggle Variable Mode on and
however, one-touch keys do not contain an LED to indicate when Variable
Mode is on.)
Variable Mode After Power-Cycling. If Variable Mode is “On”, the extension
will stay in Variable Mode even after power-cycling (system is powered down,
then powered back up).
Incompatibility with olderphone versions. Variable Mode is available on the new
44-Series phones only.
Conditions under which Variable Mode does not work. Variable Mode will be
temporarily overridden under the following conditions: during an incoming
message state, hold state, message-waiting state, or call-waiting state. Incoming
messages include:
CO Queuing
Incoming [trunk no.]
no.]
no.]
H-Recall
Call wait
no.]
Recall Hnt [Hunt Group no.]
DISA Incoming
Call [extension no.]
Transf [extension no.]
Recall [trunk no.]
HOLD Recall
New Phone Features
l
Page 17
Technical Manuals Online! - http://www.tech-man.com