Panasonic VB-43320 - Manual (Page 33)

DBS Release Notes
CPC-EX, Version 1 .O (Preliminary)
Panasonic@
June 10, 1996
to specify Data Length for Serial Port
(3 or
bits
bits
Notes
l
Serial Port 2 requires a special interface cable.
l
Serial Port 2 can be used for Bus Monitor/Maintenance only. You must
continue to use the backplane port (Serial Port 1) for SMDR.
l
Port selections are made from the Attendant phone as follows:
to set Serial Port I for... and Serial Port 2 for...
dial Bus Monitor/Maintenance no output
dial SMDR Bus Monitor/Maintenance
d i a l no output
l
When Serial Port 2 is has been entered), the internal RAI modem
cannot be accessed.
Page 34 . Additional Serial Port on CPC Card
Technical Manuals Online! - http://www.tech-man.com