Panasonic VB-43320 - Manual (Page 30)

Panasonic@
June
Notes
DBS Release Notes
CPC-EX, Version 1 .O (Preliminary)
1) Chain-Dialing Limitations and Restrictions:
l
You cannot chain-dial any within an SSD number, because the
system would not be able to choose which extension to take the PSD code
from (the same PSD code might exist on multiple extensions).
l
You cannot “chain-within-a-chain”. For example:
-- SSD Code 001 = AUTO
not dial returns busy tone instead)
-- SSD Code 002 = AUTO dial out)
-- SSD Code 003 = dial out)
(the above restriction applies to PSD codes as well)
l
You cannot chain-dial PSD or SSD codes if they are both included in each
other’s speed-dial number. For example:
-- SSD Code 000 = AUTO
not dial out; returns busy tone instead)
-- SSD Code 001 = AUTO not dial out; returns busy tone instead)
2) The progr address for SSD Display Restriction [0 or
affects SSD codes 400-499.
l
If disabled (i.e., set to “O”), the numbers assigned to SSD codes 400-499 will
display during dialing. The default is
l
If enabled (set to “l”), the numbers assigned to SSD codes 400-499 will not
display during dialing.
. . Numbers associated with SSD codes 000-399 will always display during
dialing.
Speed-Dial Enhancements
l
Page 31
Technical Manuals Online! - http://www.tech-man.com