Panasonic AJ- G - Manual (Page 11)

E-10
EN
GL
IS
H
Parts and functions
(Continued)
Basic camera operations (Continued)
!9" GAIN display
This displays the image gain of the camera
recorder. The initial value is the gain value
at the time when the GAIN switch on the
camera recorder was set to “L”.
!10" M.GAIN 3 button
When this button is pressed, the image gain
of the camera recorder is increased.
The lamp is on only when this button is
pressed.
!11" M.GAIN 4 button
When this button is pressed, the image gain
of the camera recorder is reduced.
The lamp is on only when this button is
pressed.
!12" AWB button
When this button is pressed, the camera
recorder starts the AWB (Auto White
Balance) operation.
When this button is pressed during AWB
operation, the AWB operation will forcibly
terminate.
The lamp is on during AWB operation and
off when the operation is completed
correctly. If AWB operation finishes
incorrectly, the lamp will flash for 5 seconds
and then turn off.
!13" ABB button
When this button is pressed, the camera
recorder starts the ABB (Auto Black
Balance) operation.
When this button is pressed during the ABB
operation, the ABB operation will forcibly
terminate.
The lamp is on during ABB operation and off
when the operation is completed correctly. If
the ABB operation finishes incorrectly, the
lamp will flash for 5 seconds and then turn
off.
H
!9" !12" !13" !11" !10"
AJ-RC10G.book 10 ページ ２００６年７月２６日 水曜日 午前９時２５分