Panasonic AJ- G - Manual (Page 31)

E-30
EN
GL
IS
H
Menu item
(Continued)
SKIN DTL (Continued) FUNC
Layer Item
Variable
range
Contents description Storage
5 ICENT 0
:
255 To set the center
position on the I-axis (to
set the area where
SKIN TONE is effective)
Yes IWIDTH 0
:
255 To set the width of the
area where SKIN TONE
on the I-axis with the
center position at I
CENT is effective
6 QWIDTH 0
:
255 To set the width of the
area where SKIN TONE
on the Q-axis with the
center position at I
CENT is effective
Yes
QPHASE –128
:
+127 To set the phase of the
area where SKIN TONE
having a standard on
the Q-axis is effective
7 SKIN-GET EXEC This will be used for
obtaining the color
phase as the target for
SKIN TONE DTL
No
Layer Item
Variable
range
Contents description Storage
1 IRISLVL 0
:
100 To set the target value
of the auto iris
Yes PEAK/AVE 0
:
100
To determine the
accounting ratio of the
peak against the
standard of the auto iris
2 IRIS-
WINDOW NORM1
NORM2
CENTER To select the auto iris
detection window
NORM1: Center of the
screen
NORM2: Bottom side of
the screen
CENTR: Spots at the
center of the
screen
Yes
3 IRISGAIN CAM
LENS To select whether the
iris gain is adjusted on
the camera recorder or
the lens
Yes
GAINVAL 1
:
20 To set the IRIS GAIN
adjustment value on the
camera recorder
4 USER-SW USW-M
USW-1
USW-2 To select the USER
switch where functions
will be changed
Yes
SELECT INH
S/GAIN
DS.GAIN
LINE MIX
S.IRIS
I.OVR
S.BLK
B.GAMMA
AUDIO CH1
AUDIO CH2
REC SW
Y GET
RET SW
PRE REC
DRS To select the function to
be assigned to the
USER button selected
in the USER-SW item
<Note>
When the unit is
connected to the
camera recorder, the
“I.OVR” operation is
disabled.
AJ-RC10G.book 30 ページ ２００６年７月２６日 水曜日 午前９時２５分