Panasonic AJ- G - Manual (Page 25)

E-24
EN
GL
IS
H
Menu item
Menu
The menu items on the unit may vary with the
camera recorder connected to the unit.
For the following menu items, the factory settings
for the unit only are set separately from the
camera recorder.
Š BLACK-VR-CONTROL, BLACK-VR-
MODE, and BLACK-VR-RANGE in
“BLACK”
Š GAIN-VR-MODE and GAIN-VR-RANGE in
“WHITE”
Š BUZZER, LCD CONTRAST, and SW
BRIGHT in “SYSTEM”
When the column of “Storage” in the menu table
is answered with “Yes”, the settings for the
relevant items can be stored on the unit or the
SD memory card as a scene file. For details,
refer to “Operation of the scene file” (page 19)
and “Saving/Loading of scene files onto the SD
memory card” (page 21).
BLACK
<Note>
When “PED” is selected in the BLACK-VR-CONTROL
and the lamp of the VR ACTIVE button is on or “ABS”
(absolute value) is selected in the BLACK-VR-MODE
item, it is impossible to adjust the PRED/GPEG/BPEG
items using the rotary encoder. Adjust these items using
the BLACK volume.
is the factory setting mode.
Layer Item
Variable
range
Contents description Storage
1 RPED –100
:
+100 To set the pedestal for
Rch
Yes
GPED –100
:
+100 To set the pedestal for
Gch
Yes
BPED –100
:
+100 To set the pedestal for
Bch
Yes
2 BLACK-VR-
CONTROL FLR
PED To select the items to be
adjusted using the
BLACK volume
FLR: FLARE
PED: PEDESTAL
Yes
3 BLACK-VR-
MODE ABS
REL To select whether the
BLACK volume of the
RGB is operated using
the absolute value or
the relative value
ABS: Absolute value
REL: Relative value
Yes
4 BLACK-VR-
RANGE MIN
NORM
MAX To switch the variable
range of the BLACK
volume of RGB
MIN:
n25
NORM: n50
MAX: n100
Yes
AJ-RC10G.book 24 ページ ２００６年７月２６日 水曜日 午前９時２５分