The initial setup menu – Pioneer DVR-LX70 User Manual

Page 109

Advertising
background image

The Initial Setup menu

109

En

14

Tuner

Auto Channel
Setting
(Taiwan and
Philippines model)

Antenna •

Select if you receive channels from an antenna. It
takes a few moments for the auto tuning to complete.

Cable

Select if you receive channels via cable. It takes a few
moments for the auto tuning to complete.

Auto Channel
Setting
(Other)

Next Screen

Proceed to the next screen, select your country, then
wait for automatic tuning to complete. The channel
mapping screen should appear when the recorder is
set up. Press

ENTER to exit this screen.

Manual CH Setting

Next Screen

Proceed to the next screen if you need to adjust any
of the settings made by auto tuning. Select your
country, then proceed to the manual channel setting
screen:
• Change channel presets using the

PREV/

NEXT buttons.
• To skip the displayed channel (because there is no
station assigned to that channel), change the

Skip

setting to

On.

• Set the

CH System setting to match the channel

system of your country or region (except Taiwan and
Philippines model
).
• Set the

Channel setting to the channel you want to

assign to the current channel preset (except Taiwan
and Philippines model
).
• To manually fine tune the channel, change the

AFT

setting to

Off then adjust the Level setting.

• Set the

Sound System setting to match the sound

system of your region (except Taiwan and Philippines
model
).
• The

Name field allows you to input a name of up to

five characters for the current channel preset (except
Taiwan and Philippines model
).

Channel Swapping
(except Taiwan and
Philippines model)

Next Screen

Proceed to the next screen to swap channel
assignments of different presets so that you can
group together presets that naturally go together.
Select two presets to swap then press

ENTER.

G-Code CH Setting

Next Screen

Proceed to the next screen to assign channel
numbers to the guide channels as necessary. Look in
your TV guide to see which channel numbers should
be assigned to which guide channels. Press

ENTER

when your done to leave this screen.

Setting

Options

Explanation

DVRLX70_TF_EN.book 109 ページ 2007年8月1日 水曜日 午後4時14分

Advertising
This manual is related to the following products: