Playback, Playing cds and wma/mp3 discs, Playing video cd/super vcds – Pioneer DVR-LX70 User Manual

Page 53

Advertising
background image

Playback

53

En

06

Playing CDs and WMA/MP3 discs

The table below shows the basic playback
controls for Audio CDs

1

, and WMA/MP3

files.

Playing Video CD/Super VCDs

The table below shows the basic playback
controls for Video CD/Super VCDs.

Some discs feature Playback Control (PBC
for short) menus. These discs show PBC in
the display when you load them and display
a menu on-screen from where you can select
what to watch.

2

Press to skip to previous/next
chapter/title. (During playback
you can also use the front panel
CH +/– buttons.)

During playback, enter a title
number then press

ENTER to

skip directly to that title.
Press

CLEAR to clear a number

entry and start again.

(Commercial back/skip) Each
press skips backward/forward
progressively up to a maximum
of two hours in either direction.

Press to start slow-motion
playback. Press repeatedly to
change the playback speed.
While paused, press to advance
a single frame in either
direction.

Note

1 If you want to play a DTS Audio CD, make sure the recorder is connected to a DTS-compatible amplifier/receiver

with a digital connection. Noise will be output through the analog outputs. Also make sure that

STEREO is

selected using the

AUDIO button (see Switching audio channels on page 61).

Press to start playback.

Press to stop playback.

Pauses playback, or restarts
playback when paused.

PREV

NEXT

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

CLEAR

CLEAR

ENTER

CM

BACK

SKIP

STEP/SLOW

PLAY

STOP

PAUSE

Press to start scanning. Press
again to increase the scanning
speed. (There are two scan
speeds; the current scan speed
is shown on-screen.)

Press to skip to previous/next
track.

Press to start playback.
Video CD only: If

RESUME is

displayed on-screen, playback
starts from the place last
stopped.

Press to stop playback.
Video CD only: You can resume
playback from the same point
by pressing

PLAY. (Press

STOP again to cancel the
resume function.)

Pauses playback, or restarts
playback when paused.

Press to start scanning. Press
repeatedly to increase the
scanning speed.

Press to skip to previous/next
track.
When a PBC menu is displayed,
press to display the previous/
next page. (During playback
you can also use the front panel
CH +/– buttons.)

2 When playing in PBC mode, some playback features, such as search, repeat and programme play are not

available. You can play a PBC Video CD/Super VCD in non-PBC mode by starting playback using the Disc
Navigator (see Using the Disc Navigator with playback-only discs on page 56).

REV SCAN FWD SCAN

PREV

NEXT

PLAY

STOP

PAUSE

REV SCAN FWD SCAN

PREV

NEXT

DVRLX70_TF_EN.book 53 ページ 2007年8月1日 水曜日 午後4時14分

Advertising
This manual is related to the following products: