Philips XL3402 - Manual (Page 20)

18 Use more of your phone
6.3.6 Select pause duration
This option is helpful when using operator
services. The default value of pause duration that
is preset in your XL340 should be the best suited
for your country network and therefore you
should not need to change it.
In standby mode:
Press and hold until you see MENU?.
Enter the pause duration index number (see
below).
Press and hold
until you see the new
setting is displayed.
6.3.7 Select dial mode (country
dependent)
The default value of dial mode that is preset in
your XL340 should be the best suited for your
country network and therefore you should not
need to change it.
In standby mode:
Press and hold until you see MENU?.
Enter 60.
Press and hold
to confirm.
• The new setting is shown.
6.3.8 Temporary tone dialing in pulse dial
mode
If the dialing mode is set to pulse, you can press
and hold
to set temporary tone dialing.
• d will be displayed on the screen. All the
following digits will be dialed as tones until you
hang up.
6.3.9 Set prefix insertion
The prefix insertion feature checks and formats
your outgoing call number before it is dialed. If
the first few digits of the number match with the
digits you set as DETECT, they will be replaced
by the digits you set as PREFIX.
For example, you set DETECT as 604 and
PREFIX as 967. When you are making a call to
6045551212, the actually dialed number will be
9675551212. The number shown is still
6045551212.
In standby mode:
Press and hold until you see MENU?.
Enter 62. Press and hold .
Edit the DETECT digits
OR
enter a new one if you see DETECT? (such
as 604 in the above example).
Press and hold
to confirm.
Edit the PREFIX digits
OR
enter a new one if you see PREFIX? (such as
967 in the above example).
Press and hold
to confirm.
Note
If the dialed number starts with #, * or P, the
PREFIX will not be added.
Note
Press and hold to insert a pause in PREFIX.
6.3.10Message waiting indication
If you have subscribed to the voice mail service
from your local service provider,
will be on
when you have a new message in your mailbox.
The LED on base station will blink.
After you've listened to all the new messages,
will turn off. The LED on base station will
stop blinking.
Note
You may also see VOICEMAIL shown on the
display if you have new message in your mailbox,
but it will disappear after you make an outgoing
call.
Pause duration Index Number
PAUSE 1 78
PAUSE 2 79
1
2
3
1
2
3
1
2
3
3
4
5
5
6