2 important information, 1 for your safety, 2 telephone connection – Philips XL3402 User Manual
Page 8: 3 need help, 4 conformity, 5 safety precautions, 6 digital security system, Important information, For your safety, Telephone connection
6
Important information
2
Important information
2.1
For your safety
Before installing your XL340, carefully read the
following information.
2.2
Telephone connection
Always use the line cable provided with the
product otherwise you may not have a dialing
tone.
2.3
Need help?
For more information on Troubleshooting and
FAQ's:
• Onl• Troubleshooting: see page 23
2.4
Conformity
Hereby, Philips declares that the XL340 is in
compliance with the essential requirements and
other relevant provisions of R&TE 1999/5/EC.
This product can only be connected to the
analogue telephone networks of the countries
mentioned on the packaging.
The Declaration of conformity is available on
hilips.com/support
2.5
Safety precautions
• Do not allow the handset to come into contact
with water.
• Do not open the handset or the base station.
You could be exposed to high voltages.
• Do not allow the charging contacts or the
batteries to come into contact with conductive
materials.
• Never use any battery type other than the one
supplied : risk of explosion.
Warning
Metallic objects may be retained if placed near or
on the handset receiver.
Disposal instructions for batteries:
Batteries should not be disposed of with
general household waste.
Packaging information:
Philips has marked the packaging with standard
symbols designed to promote the recycling and
appropriate disposal of your eventual waste.
A financial contribution has been paid to
the associated national recovery &
recycling system.
The labeled packaging material is
recyclable.
2.6
Digital security system
Your cordless phone uses a digital security
system to protect against false ringing,
unauthorized access, and charges to your phone
line. There is a unique digital security code
programmed in each unit. When the base and the
handset ist powered up the first time, the handset
automatically registers with the base ready for
normal use.
Note
If more than one handset is registered with the
base, registration may take approximately one
minute.
!