Panasonic CS-E21CKE - Manual (Page 4)

Indoor Unit
Automatic Operation Switch
• Press for < 5s to run Automatic Operation.
(Used when the remote control cannot be used.)
• Press continuously for 5s and < 8s to run
Forced Cooling Operation.
• Press continuously for 8s and < 11s to
run Forced Heating Operation.
• Press continuously for 11s and < 16s to
change different remote controlling
setting (4 type of transmission code).
• Press continuously for 16s or < 21s to
switch OFF / ON Remote Control
Receiving Sound or H14 Abnormality
Detection Mode.
Operation Indication Lamps (LED)
Quiet Mode
Five Operation Modes
• Automatic, Heating, Cooling, Soft Dry
and Fan Operation.
Delay ON Timer and OFF Timer
Powerful Mode
• For quick cooling or heating.
• POWER (Green) ...... Lights up during
MONITOR compressor operation.
• (Green) ............ Lights up in Ionizer
Mode Operation.
Blinks in Ionizer
error.
• POWER (Green) ...... Lights up in operation,
blinks in Automatic
Operation Mode
judging, deice, On
Timer sampling and
Hot Start operation.
• POWERFUL (Orange) ... Lights up when
Powerful Mode is
selected.
• QUIET (Orange) .... Lights up in Quiet
Mode Operation.
• TIMER (Orange) .... Lights up in Timer
Setting.
Blinks in Self
Diagnosis Control.
Automatic and 5 Manual Indoor
Fan Speeds
Automatic and 5 Manual Vertical
Airflow Directions
Automatic and 5 Manual Horizontal
Airflow Directions
Automatic Restart Control
• Operation is restarted after power failure
at previous setting mode.
Microcomputer-controlled Room
Temperature Control
• To provide extra quiet operation.
Ionizer Control
• Ionizer control for generate negative ion
in discharge air.
4