Philips ShowView DVD757VR - Manual (Page 8)

8
English
5 Select programme number '1' on the TV.
6 Confirm with B on the DVD/VCR remote control.The
DVD/VCR compares the TV channels on the TV and the
DVD/VCR.
If the DVD/VCR finds the same TV channel as on the TV, then
it stores it at 'P01'.
7 Wait until the next number, e.g. 'P:02' appears in the display.
8 Select the next programme number on the TV, e.g. '2'.
9 Confirm with B.
10 Repeat steps 7 to 9 until you have assigned a programme num-
ber to all TV channels.
11 To end, press STATUS/EXIT.
I cannot switch my TV set to programme number '1'
* If you have connected additional devices to socket
AV2(DECODER), please disconnect these devices. Because of
other connected devices, the TV set could switch to the pro-
gramme number of the scart socket.
'NO TV SIGNAL' will appear in the TV screen.The
DVD/VCR is not receiving a video signal from the TV.
Check the plug on the scart cable.
Check your TV's operating instructions to see which scart socket
is used for video signals.
If this does not help, it's not possible to use this function. Please
read the section 'Sorting TV channels manually'.
Sorting and clearing TV channels manually
After you have performed the automatic channel search you
may not agree with the sequence in which the individual TV
channels have been allocated to the programme positions (pro-
gramme numbers) of the DVD/VCR.You can use this function
to individually sort the TV channels already saved or to delete
unwanted TV channels or those with poor reception.
1 Press VCR, then DISC/VCR MENU.
2 Press K/L to select 'TUNER SET
UP' , then press B.
3 Press K/L to select 'MOVE' , then
press B.
4 Press K/L to select the saved TV
channel that you want to change.
5 Confirm with B.
6 Move the selected channel with K/L to the programme num-
ber you want to assign.
7 Confirm with B.
8 To assign other TV channels to a programme number, repeat
steps 4 to 7.
9 Confirm the assignment of the TV channel with MOVE menu.
10 To exit the MOVE menu, press STATUS/EXIT.
The clock resets automatically
If you save a TV channel that transmits TXT/PDC on programme
number ‘P01’, date and time will constantly be updated. As a result,
time changes, i.e. daylight savings time, will be set automatically.
MOVE
→P01: 02 P06: 90
P02: 03 P07: 99
P03: 05 P08: 121
P04: 10 P09: 124
P05: 74 P10: 130
SELECT K L CHOOSE B
END=EXIT
Setting the language
You have the option of setting one of the displayed languages
for the on-screen menu (OSD). However, the DVD/VCR dis-
play will only display English text regardless of this setting.
1 Press VCR, then DISC/VCR MENU.
2 Press K/L to select 'INITIAL SET
UP' , then press B.
3 Press K/L to select 'LANGUAGE'
, then press B.
4 Select the desired language with
K /L.
5 To end, press STATUS/EXIT.
SELECT K L
→ ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
SVENSKA
NEDERLANDS
END=EXIT
Setting Up your DVD/VCR
Automatic Channel Setup
You can programme the tuner to scan only the channels that
you can receive in your area.
1 Turn on the TV and select the video out channel on your TV.
2 Press VCR, then DISC/VCR MENU.
3 Press K/L to select TUNER SET UP, then press B.
4 Press K/L to select AUTO TUN-
ING, then press B.
• The tuner scans and memorizes
all the active channels in your
area. After scanning, the tuner
stops on the lowest memorized
channel.
5 Press P +/– or numerical key pads
to scan through channels you have received.
Manual Channel Preset
1 Press VCR, then DISC/VCR MENU.
2 Press K/L to select TUNER SET UP, then press B.
3 Press K/L to select MANUAL
TUNING, then press B.
4 Press K/L to select PROG., then
press B.
5 Press K/L or numerical key pads
to select your desired programme
number, then press B.
• You can select programme number 01-99.
6 Press K/L to select CHANNEL, then press B.
7 Press K/L.The DVD/VCR tuner will begin to search up or
down automatically.When a channel is found, the DVD/VCR
will stop searching and the picture will appear on the TV
Screen.
• You can select desired channel number by using numerical
key pads.You must refer to the channel plan and press three
digits to select the channel number. (To select channel 24,
first press “0” button then press “2” and “4”).
• If this is the channel you want, press B.
• If you want to remove scrambled signals, press K/L to select
DECODER.Then, press B to select [ON].
8 Press STATUS/EXIT to exit.
Note:
– To confirm that a channel has been added, press the P
+/– buttons.
– You should select the satellite channels to be received by
the satellite receiver directly on the receiver itself.
MANUAL TUNING
→PROG. P55
CHANNEL 055
DECODER [OFF]
SKIP [OFF]
SET=K L OR 0 – 9
END=EXIT
PLEASE WAIT
START FINISH
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
Follow TV (Automatic TV channels sorting)
When the automatic channel search function is activated, the
TV channels are saved in a specific order.This may vary from
the order of TV channels on the TV.
This function changes the order of TV channels saved in the
DVD/VCR to match that of the TV.
Make sure that the DVD/VCR and the TV are connected by a
scart cable.
1 Press VCR, then DISC/VCR MENU.
2 Press K/L to select TUNER SET
UP, then press B.
3 Press K/L to select 'FOLLOW TV'
, then press B.
4 'P:01' will appear in the DVD/VCR
display.
SELECT K L CHOOSE B
AUTO TUNING
MANUAL TUNING
→FOLLOW TV
MOVE
END=EXIT