Precor 300753-201 - Manual (Page 58)

8 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrainer
Industry Canada
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
European Applications
CE compliance is claimed to the following directives:
 2004/108/EC EMC Directive
 2006/95/EC LVD Directive
 2002/95/EC RoHS Directive
Directive compliance has been verified to the following
standards:
 EN 55022
 EN 55024
 EN 60335-1
 EN 60065
120 V and 240 V Equipment Designated for
U.S. Markets
Note: If you are not installing this equipment in the United
States or Canada, this section does not apply to you. You
should have received a power cable that meets your local
electrical code requirements along with the equipment. If you
need additional help with the power connections for the
equipment, contact your Precor authorized dealer.
Precor exercise equipment that is connected to an external
power circuit, such as treadmills or equipment with optional
power supplies for self-powered equipment, must be properly
grounded. In addition, Precor treadmills must be connected to
a 20 amp, dedicated branch circuit for power.
Important: A true dedicated branch circuit provides discrete hot,
neutral, and ground lines to each plug. These lines must not be
looped or "daisy-chained" to any other lines in any way.
For non-powered equipment fitted with P80 consoles or
Personal Viewing System (PVS) screens, up to 10 consoles or
PVS screens can be connected to a single 20 amp dedicated
branch circuit, or up to 7 consoles to a single 15 amp
dedicated branch circuit.