Precor 300753-201 - Manual (Page 67)

Assembling the EFX 17
Assembling the EFX
Assemble the EFX in the order presented. Once you have
assembled it, clean the ramp with a soft cloth dampened in a
diluted solution of mild soap and water.
To begin assembly:
1. Feed the cable through the right upright support. Tape the
cable to the top of the upright support to secure it
temporarily.
Important: Do not stretch, crimp, or damage the cable.
Cables damaged by improper installation will not be
covered by the Precor Limited Warranty.
Figure 3: Feed cable through right upright support