Panasonic AJ-HPX3700 - Manual (Page 11)

170 Menu: Menu Description Tables
LCD MONITOR
Items/
Data Saved
Adjustable
Range
Remarks
BRIGHTNESS –7
:
+0
:
+7
Adjust the LCD monitor brightness.
– C U F –
COLOR LEVEL –7
:
+0
:
+7
Adjust the LCD monitor chroma level.
– C U F –
CONTRAST –7
:
+0
:
+7
Adjust the LCD monitor contrast.
– C U F –
BACKLIGHT NORMAL
HIGH Adjust the backlight.
NORMAL:
Mode normally used
HIGH: This is brighter than NORMAL.
– C U F –
SELF SHOOT NORMAL
MIRROR Select whether or not to change the LCD
monitor to mirror image.
NORMAL:
Do not change to mirror image.
MIRROR:
Change to mirror image.
– C U F –
GENLOCK
Items/
Data Saved
Adjustable
Range
Remarks
GENLOCK INT
EXT Switch the camera synchronizing signal.
INT:
Synchronize with the internal
reference signal regardless of
the reference signal input to the
GENLOCK IN connector.
EXT: Synchronize with the reference
signal input to the GENLOCK IN
connector.
– C U F R
GL PHASE HD SDI
COMPOSIT For selecting the output signals that lock
phases to the signals that are input in the
GENLOCK IN connector. Note, however,
that in 1080-23.98PsF mode and 1080-
24PsF mode, the phase is locked to HD
SDI even if “COMPOSIT” has been
selected.
HD SDI:
For locking the HD SDI output
signals to the GENLOCK input.
For the down converter output
signals, the start position of the
video delays by about 90 lines.
COMPOSIT:
For locking the down converter
output signals to the GENLOCK
input.
For the HD SDI output signals,
the start position of the video
gains by about 90 lines.
– C U F R
H PHASE
COARSE –100
:
+000
:
+100
Perform coarse phase adjustment for
horizontal hold when configuring a
system.
– – – – –
H PHASE FINE –100
:
+000
:
+100
Perform fine phase adjustment for
horizontal hold when configuring a
system.
– – – – –
1394 SETTING
Items/
Data Saved
Adjustable
Range
Remarks
1394 SPEED S100
S200
S400 For setting the transfer rate of signals
output from the DVCPRO connector.
S100: 100 Mbps
S200: 200 Mbps
S400: 400 Mbps
– C U F –
1394 IN CH 0
:
63
AUTO
For setting the input channel of signals
input to the DVCPRO connector.
0 - 63: To fix to the designated value
AUTO: To follow the settings of the
externally connected devices
– C U F –
1394 OUT CH 0
:
63
AUTO
For setting the output channel of signals
output from the DVCPRO connector.
0 - 63: To fix to the designated value
AUTO: To follow the settings of the
externally connected devices
– C U F –
1394 CONTROL OFF
BOTH
For setting the control for recording start/
stop operations of external devices that
are connected to the DVCPRO
connector.
OFF:
Do not control the externally
connected devices.
BOTH: To control both the unit and the
externally connected devices
– C U F –
1394 CMD SEL REC_P
STOP For setting the control of recording stop
operations of the external devices that
are connected to the DVCPRO
connector.
REC_P: Operation to pause recording
STOP: Stopping operation
– C U F –
Items/
Data Saved
Adjustable
Range
Remarks
AJ-HPX2700G-VQT1V27_eng.book 170 ページ ２００８年９月２日 火曜日 午後５時４３分