Pioneer SX-LX03 - Manual (Page 110)

Advanced settings 06
110
En
AAC Out
* Only valid for digital
audio outputs.
AAC Select this when the connected AV receiver or amplifier, etc.,
is compatible with AAC audio signals. The AAC audio signals
are output.
AAC  PCM Select this when the connected AV receiver or amplifier, etc.,
is not compatible with AAC audio signals. The AAC audio
signals are converted into linear PCM audio signals for
output.
DTS Downmix Stereo DTS-HD Master Audio signals, DTS-HD High Resolution
Audio signals or DTS Digital Surround audio signals
converted to linear PCM audio signals are converted into 2-
channel (stereo) signals for output.
Lt/Rt DTS-HD Master Audio signals, DTS-HD High Resolution
Audio signals or DTS Digital Surround audio signals
converted to linear PCM audio signals are converted into 2-
channel signals compatible with Dolby Surround for output
(when the connected AV receiver or amplifier, etc., is
compatible with Dolby Pro Logic, the AV receiver or amplifier
outputs the linear PCM audio signals as surround audio
signals).
Speakers
Audio Output Mode
* Only valid for analog
audio outputs.
2 Channel Select this when the TV’s analog 2-channel (stereo) audio
input terminals are connected to the player’s
AUDIO OUT (2
ch) terminals.
Multi-channel Select this when the multi-channel audio input terminals of
an AV receiver or amplifier, etc., are connected to the player’s
AUDIO OUT (7.1 ch) terminals.
Speaker Setup
* Only valid for analog
audio outputs.
When an AV receiver or amplifier, etc., is connected to the player’s AUDIO OUT
(7.1 ch) terminals, this sets whether or not to use the speakers which are connected
to the AV receiver or amplifier, as well as the size of the speakers. For details, see
Changing the speaker setup on page 114.
Channel Level
* Only valid for analog
audio outputs.
Fix The output for the various speakers is set to the maximum.
Variable The output level of the various speakers is set within the range
of –6.0 dB to +6.0 dB (in 0.5 dB steps) (page 115).
HDMI
HDMI High-Speed
Transmission On Select this when connected with a High Speed HDMI™ cable
(page 77).
Off Select this when connected with a Standard HDMI™ cable
(page 77).
The player’s setting screen is closed if the output video resolution is switched by changing the HDMI High-
Speed Transmission setting.
When HDMI High-Speed Transmission is set to On, use the supplied HDMI cable.
Setting Options Explanation
LX03BD_2.book Page 110 Monday, July 28, 2008 4:30 PM