Pioneer SX-LX03 - Manual (Page 126)

Additional information 07
126
En
Multi-channel sound
is not output. Is the AV receiver or amplifier,
etc. connected to the
HDMI
OUT terminal, the AUDIO OUT
(7.1 ch) terminals or DIGITAL
OUT (OPTICAL) terminal?
Read the operating instructions of the connected AV
receiver or amplifier and check the audio output settings of
AV receiver or amplifier.
Is Output Terminal Priority
properly set?
Linear PCM (2-channel) audio signals are output from
output terminals other than the one set at
Audio under
Output Terminal Priority. Set Output Terminal Priority
properly (page 119).
Is the audio output of the
connected AV receiver or
amplifier, etc., properly set? Read the operating instructions of the connected AV
receiver or amplifier and check the audio output settings of
AV receiver or amplifier.
Is multi-channel sound
selected? Use the menu screen or AUDIO to switch the disc’s sound
to multi-channel.
Is Audio Out set to audio
formats supported by the
connected AV receiver or
amplifier?
• Read the operating instructions of the connected AV
receiver or amplifier and check the supported audio formats.
• Set
Audio Out properly (page 109).
Are Audio Output Mode and
Speaker Setup properly set?
• When the AV receiver or amplifier, etc., is connected to the
AUDIO OUT (7.1 ch) terminals, set Audio Output Mode to
Multi-channel (page 110).
• Set
Speaker Setup properly (page 110).
Digital audio signals
are not output from
the
DIGITAL OUT
(OPTICAL) terminals
(analog audio signals
are output).
Is Audio Out set to audio
formats supported by the
connected AV receiver or
amplifier?
• Read the operating instructions of the connected AV
receiver or amplifier and check the supported audio
formats.
• Set
Audio Out properly (page 109).
Noise can be heard
when outputting DTS
Digital Surround
signals. Is the connected AV receiver or
amplifier compatible with DTS
Digital Surround? If an AV receiver or amplifier that is not compatible with DTS
Digital Surround is connected to the
DIGITAL OUT
terminal, set DTS Out to DTS  PCM. Noise will be heard
if DTS Out is set to DTS (page 109).
192 kHz or 96 kHz
digital audio signals
cannot be output
from the
DIGITAL
OUT (OPTICAL)
terminals.
It is not possible to output 192 kHz or 96 kHz digital audio
signals from this player’s
DIGITAL OUT (OPTICAL)
terminals. The signals are automatically converted to under
96 kHz for output.
Secondary audio or
interactive audio is
not output. Is HDMI Audio Out properly
set?
Set HDMI Audio Out to PCM (page 111).
Are Dolby Digital Out and DTS
Out properly set?
Set Dolby Digital Out to Dolby Digital 1, DTS Out to DTS
1 (page 109).
Sound is fast or slow. When an HDMI cable is
connected, are audio signals
being output from devices
connected with cables other
than HDMI cables?
When this player is connected by HDMI cable to a Pioneer
AV receiver or amplifier compatible with the PQLS function
via HDMI connection, the PQLS function is activated when
playing a music CD (CD-DA). Because of this, the sound
output from components other than the ones connected by
HDMI cable may be fast or slow. If this happens, set
PQLS to
Off (page 111).
Problem Check Remedy
LX03BD_2.book Page 126 Monday, July 28, 2008 4:30 PM