Panasonic SC-AK960 - Manual (Page 13)

13
RQT8043
RQTX0169
L
A
N
G
-
5
LANG - 5
L
A
N
G
-
4
LANG - 4
F
R
A
N
Ç
A
IS
FRANÇAIS
D
A
N
S
K
DA
N
S
K
ENGLISH
The buttons described for “Microphone mixing” are mainly for
the main unit unless indicated otherwise.
Enjoying the microphone mixing Enjoying the microphone mixing
You can enjoy microphone mixing from various music sources (cas-
sette, disc, radio or other external equipments).
1
Firstly, lower the volume with [MIC VOL, MIN], connect the
microphone.
Plug type : Ø 3.5 mm (1/8˝) monaural
2
Start playing the music source.
3
Adjust the volume with [VOLUME − ] or [VOLUME + ] and
[MIC VOL, MIN] or [MIC VOL, MAX] and sing along.
Note:
• If a strange noise (howling) is emitted during use, move the
microphone away from the speakers, or turn down the microphone
volume.
• When you are not using the microphone, disconnect it from the
microphone jack, and turn down the microphone volume level to
“MIN”.
• Sound adjustments can be made using microphone mixing but
recording will not be affected.
Record microphone mixing Record microphone mixing
1
Press [ 0, OPEN] and insert the cassette to be recorded.
Insert with the side to be recorded facing towards you and the
exposed tape facing down.
2
Lower the volume with [MIC VOL, MIN], then connect the
microphone.
3
Select the music source:
When singing
along with
discs Insert the desired disc (
\
page 8).
When singing
along with
radio Select your desired station (
\
page 12).
When singing
along from
other external
equipments Connect and prepare the external equipment
(
\
page 15).
4
Press [ ¶, REC] and start microphone mixing.
To record your voice To record your voice
1
Press [ 0, OPEN] for DECK 2 and insert the cassette to be
recorded.
2
Lower the volume with [MIC VOL, MIN], then connect the
microphone.
3
Press [ ¶, REC] to start recording.
4
Speak through the microphone and adjust the volume with
[VOLUME − ] or [VOLUME + ] and [MIC VOL, MIN] or
[MIC VOL, MAX].
Microphone mixing
Setting the clock Setting the clock
This is a 12-hour clock.
1
Press and hold [– CLOCK / TIMER] to select “CLOCK”.
Each time you press and hold the button:
CLOCK ˚ PLAY
Original display
˚ REC
2
( Within 8 seconds or so )
Press [ 4, / REW] or [¢, / FF] to set the time.
3
Press and hold [– CLOCK / TIMER] to finish setting the time.
Displaying the clock
Press and hold [– CLOCK / TIMER] once when the unit is on or in
standby mode.
The time is displayed for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
Using the play or record timer Using the play or record timer
You can set the timer to come on at a certain time to wake you up
(play timer) or to record from the radio or the external equipment
(record timer).
Play timer and record timer cannot be used together.
Turn the unit on and set the clock.
Timer Action
Play timer Prepare the music source you want to listen to;
cassette, disc number (1 ~ 5), radio or other external
equipments, and set the volume.
Record
timer Check the cassette’s erasure prevention tabs
(
\
page 11), insert the cassette and tune to the
radio station (
\
page 12) or select the external
equipment (
\
page 15).
1
Press and hold [– CLOCK/TIMER] to select the timer function.
Every time you press and hold the button:
CLOCK ˚ PLAY
Original display
˚ REC
˚PLAY : to set the play timer
˚REC : to set the record timer
(Proceed to the next step
within 8 seconds )
2
Press [ 4, / REW ] or [¢, / FF] to set the starting time.
Play timer indicator
Start time
Record timer indicator
3
Press and hold [– CLOCK / TIMER] to confirm.
4
Repeat steps 2 to 3 to set the fi nishing time.
Finish time
Timer
(Continued on next page)
RQTX0169-P.indd 13 RQTX0169-P.indd 13 7/18/08 9:25:00 AM 7/18/08 9:25:00 AM