2 console port (com3), Com3), 2 console port – Psion Teklogix Hand-Held Computer 7530 G2 User Manual

Page 229: Parity, Stop bits, Enabled, Baud

Advertising
background image

Psion Teklogix 7530 G2 Hand-Held Computer User Manual

201

Chapter 5: Configuration

Ports

Parity

This parameter determines the type of parity checking used on the data going
through the tether port. Double-tapping on this option displays a pop-up window in
which you can choose the appropriate Parity.

Stop Bits

This parameter specifies the number of stop bits – 1, 1.5 or 2 – used for asynchro-
nous communication.

5.11.8.2 Console Port

(COM3)

Note: The console port is accessed via the docking connector on the bottom of

the 7530 G2. Only the Portable Docking Module (PDM) provides access
to the console port through a DE-9 interface.

Enabled

This parameter must be set to on in order for the 7530 G2 to recognize the device
connected to the console port.

Baud

Refer to page 200 for details.

Advertising