Psion Teklogix Hand-Held Computer 7530 G2 - Manual (Page 67)

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 39
Chapter 3: Getting To Know Your 7530 G2
Numeric Keyboard – 37-Key
The examples below illustrate how to access A, B and C, all of which are printed in
orange characters above the numeric key, [2].
To choose the letter ‘a’:
• Press the [ORANGE] key, and press the numeric key [2].
To choose the letter ‘b’:
• Lock the [ORANGE] key on, and press [2] twice.
• Press the [ORANGE] key again to unlock it.
To choose the letter ‘c’:
• Lock the [ORANGE] key on.
• Press [2] three times.
• Press the [ORANGE] key again to unlock it.
Creating Uppercase Letters
To display a capital letter:
• Press the [ORANGE] key and then the [SHIFT] key before typing the
alpha character.
Choosing More Than One Alpha Character From The Same Key
If you need to choose more than one alpha character from a single key, you’ll need
to press the ‘Accept’ key between alpha selections. The ‘Accept’ key is presented as
an arrow [
⇒] symbol above the [0] (zero) key. Pressing this key signals the 7530 G2
to display the alpha character you’ve chosen and await the next selection from the
same key.
Note: Remember that as you choose alpha keys, each is displayed in the
left-hand corner of the taskbar to make it easier to determine which letter
is currently chosen.
For example, suppose you want to type the letters ‘a’, ‘b’ and ‘c’. These letters are
all accessible from the numeric key, [2].
To type the letter ‘a’:
• Lock the [ORANGE] key ‘on’, and then press the numeric key, [2].
• Press the ‘Accept’ key [ ⇒] (zero key) to indicate that the letter ‘a’ should
be accepted and that another letter from the same key will be chosen.