Polycom KIRK 4080 - Manual (Page 43)

12. Date and Time Function
The Date and Time function requires the use of a KIRK Wireless Server and special software in the main system.
If the Date and Time function is supported, a clock is shown in the 1st line of the display. The clock shows the time
with an accuracy of +/- 1 minute.
If the Date and Time function is supported, then date and time of the incoming or outgoing call is also shown in
the CLIP/Redial stack on the 4th line of the display. An icon + date and time shows the status of the call.
If the call is missed, the date and time is displayed: 29/03 20:28
If the incoming call is received, the date and time is displayed: 29/03 20:28
If the outgoing call is made, the date and time is displayed: 29/03 20:28
Date and time is only displayed if CLIP feature is supported by the PBX.
43
1412 1600-ed5_1412 1600-ed5 16-12-2010 10:29 Side 43