Primera Technology LX400 - Manual (Page 13)

Hardware and Software Settings 9
3. Remove any shipping tape from your label stock roll to
ensure that it can unroll freely, making certain that no
adhesive portion is exposed. It is important to note that
any exposed adhesive surface can attach itself the inner
workings of the print mechanism and cause a media jam.
Note: If you are using fan-fold label stock or label stock other than standard
square / rectangular die cut labels before continuing see Sections 2F
and 2G for additional instructions.
4. Place the label stock between the stock guide rollers and
release the spring loaded stock guide to hold the label
stock. The stock guide rollers allow the label stock roll to
move freely.
Stock Guide Rollers
510984.qxd 11/21/2006 9:08 AM Page 9
TOC INDEX