Primera Technology LX400 - Manual (Page 9)

Hardware and Software Settings 5
Section 2: Hardware and Software
Setup
A. INSTALLING THE PC SOFTWARE
The Installer Disc has a menu that will guide you through
the process of setting up your duplicator. Please refer to the
following for more information on each step:
1. Place the Installer CD in your CDRom Drive. The Installer
application should automatically launch in a few moments.
If it does, proceed to Step 2. If it does not automatically
launch, follow these steps:
•
Double-click the My Computer Icon, then double-click
the icon of the appropriate CD drive containing the
Software Installer disc.
• Double-click Installer.exe
2. In the Installer Application, click the Standard Install
button. The on screen instructions will guide you step-by-
step through the installation process.
B. INSTALLING THE MAC SOFTWARE
Please note that your user account must have administrative
rights to properly install a new printer. You can check with
your system administrator or check with Apple support to
confirm whether or not your account has administrative rights.
Install the software as follows:
a. Insert the Installation CD-ROM in your system's CD-ROM
drive.
b. Double-click the CD-ROM icon.
c. Double-click on the Color Label Installer.mpkg file icon.
Follow the on-screen instructions.
d. The volume containing the operating system should be
selected for installation. Click the Continue button. All
components will be installed to their proper locations.
e. Once the installation has completed, click Quit.
You have successfully installed all the necessary software!
Section C below will describe how to connect the Printer to
your Mac.
510984.qxd 11/21/2006 9:40 AM Page 5
TOC INDEX