Panasonic KX-TG8231 - Manual (Page 15)

Preparation
For assistance, please visit http://www.panasonic.com/help 15
Voice guidance language
You can select either “ English ” or
“ Español ” as the voice guidance
language of the answering system
(page 30). The default setting is
“
English ”.
1
{
MENU} (center of joystick)
2 Select I by pushing the joystick in
any direction. i {SELECT}
3 Push the joystick up or down to
select “
Settings ”. i {SELECT}
4 Push the joystick up or down to
select “
Voice prompt
”. i
{ SELECT}
5 Push the joystick up or down to
select the desired language. i
{
SAVE} i {OFF}
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “
Tone
”.
“
Tone
”: For tone dial service.
“
Pulse
”: For rotary/pulse dial service.
1
{ MENU} (center of joystick)
2 Select * by pushing the joystick in
any direction. i {SELECT}
3 Push the joystick up or down to
select “
Set tel line
”. i
{ SELECT}
4 Push the joystick up or down to
select “
Set dial mode ”. i
{ SELECT}
5 Push the joystick up or down to
select the desired setting. i
{
SAVE} i {OFF}
Date and time
Set the correct date and time so that:
– You can use the alarm function (page
28).
– The unit will announce the day and
time a message was recorded when
you play back on the answering
system (page 31).
1
{ MENU} (center of joystick)
2 Select K by pushing the joystick in
any direction. i {SELECT}
3 Push the joystick up or down to
select “
Date and time
”. i
{
SELECT}
4 Enter the current month, date, and
year.
Example: August 15, 2007
{
0}{8} {1}{5} {0}{7}
5 Enter the current hour and minute
(12-hour clock format).
Example: 9:30
{
0}{9} {3}{0}
6 Press {*} to select “
AM
” or “
PM
”.
7
{
SAVE} i {OFF}
Note:
L
When English is selected as the
display language, 12-hour clock
format is used. When Spanish is
selected, 24-hour clock format is
used.
L If you make a mistake when entering
the date and time, push the joystick
right, left, up, or down to move the
cursor, then make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
TG8231_8232.book Page 15 Thursday, July 19, 2007 3:22 PM