Panasonic KX-TG8231 - Manual (Page 43)

Useful Information
For assistance, please visit http://www.panasonic.com/help 43
Battery recharge
I cannot program items. L Programming is not possible while either the
base unit or another handset is being used. Try
again later.
While programming, the
handset starts to ring.
L
A call is being received. Answer the call and
start again after hanging up.
I cannot register a handset
to a base unit. L The maximum number of handsets (6) is already
registered to the base unit. Cancel unused
handset registrations from the base unit (page
38).
L Place the handset and the base unit away from
other electrical appliances.
Problem Cause/solution
The batteries should be
charging but the battery
icon does not change. L Clean the charge contacts and charge again
(page 13).
The handset beeps
intermittently and/or )
flashes. L Fully charge the batteries (page 13).
I fully charged the
batteries, but ) still
flashes. L Clean the charge contacts and charge again
(page 13).
L It is time to replace the batteries (page 12).
I fully charged the
batteries, but the operating
time seems to be short. L Wipe the battery ends (S, T) and the unit
contacts with a dry cloth.
The handset display is
blank. L The handset is in screen saver mode (page 14).
Press {OFF} to activate the handset display
again.
L
Confirm that the batteries are properly installed.
L
Fully charge the batteries (page 13).
Problem Cause/solution
TG8231_8232.book Page 43 Thursday, July 19, 2007 3:22 PM