Panasonic CU-C12DKU - Manual (Page 53)

Fig. 4
− Remove the indicator complete screw, and then remove
the Indicator Complete.(Fig.4)
Fig. 5
− To remove the electronic controller.
− Remove the particular piece (Fig.5).
− Release CN-FM connector (Fig.)
− Release CN-FB connector (Fig.5)
− Release CN-TH connector (Fig.5)
− Release CN-STM1 connector (Fig.5)
− Release CN-DISP connector (Fig.5)
Fig. 6
− Press the hook to the right then take out the PCB (Fig.6)
− Remove Ry-Pwr connector (black and brown) from the
terminal board. (Fig.6)
− Remove AC-Wht connector from the PCB. (Fig.6)
53
CS-C9DKU CU-C9DKU / CS-C12DKU CU-C12DKU