Panasonic RG4-E02 - Manual (Page 28)

28
Charging the battery
You need to fully charge the battery before you can
switch your Toshiba phone on for the first time.
The battery will only achieve optimum performance
after two or three complete charges.
You can charge your battery in the following two
ways:
1. Plug the AC adapter into an AC outlet and
connect to the charger connector on your
Toshiba phone. When the battery is fully
charged, unplug the AC adapter from the AC
outlet and disconnect it from the phone charger
connector by gripping tightly and pulling gently.
Or
2. .Connect your Toshiba phone to a PC with the
USB cable. Ensure that your Toshiba phone is
on before connecting it to your PC.
TIP: To check your battery status, refer to
Changing power management settings
section.
Low battery indicator
When the battery charge level is running low, a
warning tone sounds and the Battery Low message
is displayed repeatedly. If the battery charge level
runs too low for normal operation, your Toshiba
phone will automatically switch off.
Battery information
Battery performance depends on many factors,
such as your Service Provider's network
configuration, signal strength, the temperature of
the environment in which you operate your Toshiba
phone, the features and/or settings you select and
use, items attached to your phone's connecting
ports, and your voice, data, and other program
usage patterns.
It is recommended that you save your
memory data to a PC or storage card.
The manufacturer is not responsible for data
lost or altered due to battery discharge.