Panasonic SA-XR58 - Manual (Page 31)

ENGLISH
RQTV0156
31
Select and confirm.
Adjust and confirm. Adjustment range: -10 dB to +10 dB
Factory setting: 0 dB
Select and confirm.
Adjust and confirm. Adjustment range: -10 dB to +10 dB
Factory setting: 0 dB
Adjusting the bass
2
3
Adjusting the treble
2
3
The sleep timer turns the unit
off after a set time.
It does not control any other
components.
•
•
Select and confirm.
Select the time and confirm.
Times available: 30, 60, 90, 120 (minutes)
Factory setting: OFF
Sleep timer
2
3
Dim the display for better viewing
in a darkened room.
Select and confirm.
Select a level and confirm.
To return to the normal brightness, select “DIMMER OFF”. •
Adjustment range:
DIMMER 1 (bright) to DIMMER 3 (dim)
Factory setting: OFF
Adjusting the dimness
of the display
2
3
You can switch between the main
and secondary audio soundtracks
of Dolby Digital or DTS sources.
Select and confirm.
Select the audio track and confirm.
MAIN: Main audio channel (factory
setting)
SAP: Second audio program
M+S: Main and second channel
Selecting audio
channels
“DUAL PRG” appears on the display when the unit is receiving a signal with dual audio
channels.
2
3
Select and confirm.
Adjust and confirm.
Use the bar as a guide.
L: Front left
R: Front right
You cannot adjust the balance when the
“PARTY” SFC mode is on (
➡ page 24).
Adjusting front
speaker balance
2
3
Adjust the subwoofer level while
listening to a source for a more or
lesser bass.
Press to select a level.
Factory setting: SUBW 20
There is no output from the subwoofer if you select “---”.
•
•
Adjusting the
subwoofer level
Adjustment range: --- (off),
MIN (minimum), 5, 10, 15, 20,
25, MAX (maximum)
Sound can be distorted if you raise the volume while subwoofer level is high. Reduce subwoofer level if
this occurs.
You can also make fine adjustments to subwoofer level (“Speaker output and level”,
➡ page 17).
•
•
SUBWOOFER
Press
The display dims to the level you have selected.
Press again to cancel.
•
•
DIMMER
“SLEEP” lights when the timer is set.
To check the setting:
Select “SLEEP” again in Step 2.
To change a setting:
Repeat the procedure from the
beginning.
•
•
•
Press
“MUTING IS ON” scrolls across the display while output is muted.
Press again to cancel.
Muting also cancels when you adjust the volume or switch the unit to standby.
Muting
MUTING
Note
Note
Sound effects/Other functions
Other functions
Sound effects
SA-XR58.indb 31 6/27/2006 6:55:31 PM