Philips VR102 - Manual (Page 5)

- 5 - EN
VCR to TV Connection
1. Disconnect the mains cord of the TV from the AC outlet.
2. Disconnect the VHF/UHF TV aerial coaxial cable from the TV.
3. Connect the VHF/UHF TV aerial coaxial cable to the VCR.
4. Connect the VCR to the TV using the coaxial cable.
5. Plug the mains cords of the VCR and TV into the AC outlets.
RF OUT
AERIAL
VHF/UHF
MIXER
to AERIAL
to RF OUT
(Back of the unit) to aerial socket
(TV)
UHF VHF
Getting Connected
Other Connections
Your VCR is fitted with one audio/video jack which
you may connect to other external devices with
audio/video jack. We recommend this connection
to ensure a better audio and picture quality during
use.
Euro audio/video cable is obtainable at your
dealer.
Euro A/V (Scart) Jack TV Scart Jack Connection to TV
If your TV has audio/video jack, you may connect
your VCR’s TV scart jack to the audio/video jack
on back of your TV. Please see your TV’s owner’s
manual.
RF OUT
AV1 (TV)
AERIAL
to 21-Pin
or
to 21-Pin Scart Jack
Decoder (Not supplied)
(TV)
to RF OUT
to aerial
socket
Scart Jack
TV Scart Jack Connection
for Other External Devices
The TV scart jack is designated for other external
devices e. g. Decoder, another VCR, Video
Camera and so on.
External Input Mode
To receive the signal from an external input
(decoder, video camera, another VCR etc.),
connect the device to the TV scart jack, and press
[CH. (
K / p )] or enter “00” with number buttons.
“A/V IN” appears on the TV screen.
H87T4(EN)TOP.QX33 01.7.3 6:43 PM Page 5