Philips VR102 - Manual (Page 8)

- 8 - EN
Make sure ...
• You must use the remote control for this proce-
dure.
Set the clock accurately for proper automatic
timer recording.
1. Press [VCR].
2. Press [MENU].
3. Press [PLAY/
K ] or [STOP/ p ] to select “INI-
TIAL SET UP”, then press [F.FWD/ B ].
4. Press [PLAY/ K ] or
[STOP/ p ] to select
“CLOCK”, then press
[F.FWD/
B ].
Setting the Clock
SELECT op CHOOSE B
→ CLOCK
RF OUT
LANGUAGE
END=EXIT
To Skip the Channel
The channels you no longer receive or seldom use
can be skipped from access by [CH. (
K / L )].
5-a). Press [PLAY/ K ] or
[STOP/ p ] to select
“SKIP”, then press
[F.FWD/
B ] to select
[ON].
• You press [F.FWD/
B ]
again, [ON] will change to [OFF]. The
channel is memorised again.
5-b). Press [STATUS/EXIT] to exit.
Channel Change
You can replace two channels.
3-a). Press [PLAY/
K ] or
[STOP/ p ] to select
“MOVE”, then press
[F.FWD/
B ].
3-b). Press [PLAY/ K ] or
[STOP/ p ] to select the
channel number you want to change, then
press [F.FWD/
B ].
3-c). Press [PLAY/ K ] or [STOP/ p ] to select
another channel number, then press
[F.FWD/
B ].
3-d). Press [STATUS/EXIT] to exit.
MANUAL
PROG. P55
CHANNEL 55 → SKIP [ON]
SELECT op CHOOSE B END=EXIT
MOVE
P01: 02 P06: 90
P02: 03 → P07: 99
P03: 05 P08: 121
P04: 10 P09: 124
P05: 74 P10: 130
SELECT op CHOOSE B
END=EXIT
When you enter the clock;
• Enter a 0 before a single digit number.
• Entries that do not match the VCR’s internal
calendar will cause a question mark (?) to
appear on the TV screen.
• Press [CLEAR] to go back one step from cur-
rent step.
5. Press number buttons to
enter your desired HOUR,
MINUTE.
6. Press number buttons to
enter your desired DAY ,
MONTH and YEAR.
7. Press [STATUS/EXIT].
The internal clock starts and the normal TV
screen resumes.
NOTE:
When unplugging the mains cord or if there is a
power failure for more than one minute, you
may have to reset the clock.
TIME 15:27
DATE 28/10/01
SUN.
CORRECT = CLEAR
END = EXIT
Channel Plan
CH Indication TV Channel
02 ~ 12 E2 ~ E12
13 ~ 20 A ~ H (only ITALY)
21 ~ 69 E21 ~ E69
74 ~ 78 X, Y, Z, Z+1, Z+2
80 ~ 99 S1 ~ S20
100 S52
121 ~ 141 S21 ~ S41
This VCR will receive Hyper and Oscar bands.
7. Press [STATUS/EXIT] to exit.
H87T4(EN)TOP.QX33 01.7.3 6:43 PM Page 8