Philips LX7000SA User Manual
Page 16
14
English
P
REPARATIONS
Note:
– The format you select must be available on the disc. If it is
not, the settings for TV Shape will not affect the picture during
playback.
ö Black level shift (NTSC output only)
Select On if you set the DVD system to NTSC and you are
playing NTSC-compatible DVDs. This will improve the
colour contrast and picture.
ö Video shift
Use this setting to move the picture on your TV to the left
or right. The default setting is in the centre.
ö Colour settings
You can select one of the predefined sets of colour settings:
Personal, Rich, Natural, Soft or Animation..
ö Personal colour
It allows you to define your own set of colour settings by
adjusting : Saturation, Brightness and Contrast. Use
3 4
keys to adjust the values of these settings, then press
OK.
ö TV System (NTSC/PAL conversion)
This setting is applicable only if you used the CVBS or
SCART jacks to connect the DVD system to a TV. Select
the colour system that matches the connected TV.
You do not need to change the setting if your TV is
PAL-compatible. The factory default setting is PAL. It will
change the video signal of a NTSC disc and playback in PAL
format.
If your TV is compatible with both NTSC and PAL,
select AUTO.
If your TV is NTSC-compatible,
select NTSC. It will not support the PAL format DVDs and
playback of a PAL DVD is not possible.
Note:
– Slight picture distortions may occur due to this conversion.
This is normal.
Setting the sound
Digital output
Analogue output
Night mode
Karaoke vocal
PCM output
Stereo
On
48 KHZ
All
1en
1en
st
1
Speakers
Settings...
Off
ö Digital output
Digital output lets you specify the type of digital output
available with the other equipment connected.
Select All, if you have connected the DVD system’s
DIGITAL OUT jack to an equipment that has a
multichannel decoder.
Select PCM only (default setting), if the other equipment is
not capable of decoding multichannel audio.
Select Off to deactivate the digital output.
Note:
– You cannot hear the SACD or MP3-CD playback if you use
the digital connection.
ö Analogue output
Select Stereo, 3D sound (TruSurround) or Multi-channel
to match your DVD home cinema system’s playback
capability.
This function can also be accessed via the
SURROUND button on the remote control.
16:9
(Wide screen)
4:3 LB
(Letter Box)
4:3 PS
(Pan Scan)