Introduction and general information, Features, Discs for playback – Philips LX7000SA User Manual

Page 8: Supplied accessories, Environmental information, Installation, Maintenance

Advertising
background image

6

English

Features

Your complete 7-piece 275-Watt (LX8000SA) or
200-Watt (LX7000SA) DVD Digital Home Cinema System
creates the same dynamic sound qualities that you find in
full-fledged cinemas and incorporates some of the best
features in home theatre technology.

Features include:

Built-in DTS and Dolby

R

Digital decoder,

supporting Dolby

R

ProLogic and 3D sound

Use the Home Cinema Audio System for a movie-theatre
surround sound experience.

Additional Equipment Connections

Connect other audio and audio/visual equipments to the DVD
system so you can use the system’s surround sound speakers.

Parental Level

(only available in region 1 player)

Set a ratings level so your children cannot watch a DVD that has a
rating higher than you set.

Child Lock

Block specific DVDs from playing, regardless of how you set the
Parental Level.

Sleep Timer

Enable the system to switch to standby mode automatically at a
preset time.

Plug and Play

Store all available radio stations automatically when you
turn on the power.

Discs for playback

Your DVD system is able to play :

All pre-recorded audio CDs

All finalised audio CDR and audio CDRW discs

All Video CDs, Super Video CDs,
Super Audio CDs, and DVDs

MP3-CDs (CD-ROMs with MP3 tracks)

Player zone

DVD discs and players are designed with regional
restrictions. Before playing a disc, make sure the disc is the
same zone as your player.

The region code for this DVD system is 2.

Supplied accessories

a remote control with two AA batteries

an MW loop antenna and an FM wire antenna

an audio cable, Scart cable and centre out cable for
connection with the TV.

four satellite speakers and one centre speaker, including
five speaker cables

an active subwoofer, including a connection cable
and a power cable

a power cable for connection with the main unit

five speaker brackets and five screws.

four mini speaker stands and eight screws (for model
LX8000SA only)

one pair of speaker stands (for model LX8000SA only)

this instruction booklet

If any item is damaged or missing, contact your retailer or
Philips.

Environmental information

All unnecessary packaging has been omitted. We have tried
to make the packaging easy to separate into three materials:
cardboard (box), polystyrene foam (buffer) and
polyethylene (bags, protective foam sheet).

Your system consists of materials which can be recycled
and reused if disassembled by a specialised company. Please
observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.

Installation

● Place the system on a flat, hard, and stable surface.
● There must be sufficient room in front of the system for

the drawer to open.

● In a cabinet, allows about 10cm (4 inches) of free space all

around the system for adequate ventilation.

● Do not expose your system to extreme temperatures or

humidity.

Maintenance

● When a disc becomes dirty, clean it with a

cleaning cloth. Wipe the disc from the
centre out, in a straight line.

● Do not expose the system, batteries or

discs to humidity, rain, sand or excessive
heat (caused by heating equipment or
direct sunlight). Always keep the disc tray closed to avoid
dust on the lens.

● Do not use solvents such as benzene, thinner, commercially

available cleaners, or anti-static spray intended for color
discs.

● The lens may cloud over when the system is suddenly

moved from cold to warm surroundings, making it
impossible to play a disc. Leave the system in the warm
environment until the moisture evaporates.

Introduction and General Information

I

NTRODUCTION

AND

G

ENERAL

I

NFORMATION

2

Advertising